Clean Fill Dirt
Standard bulk fill with no organic matter — the go-to for grading, lot prep and raising low spots before construction.
Grading · Lot Prep · BackfillCedar City · Iron County · Construction-Grade Fill
Fill Dirt Delivery in Cedar City, UT
Builders, Excavators & Homeowners · Grading to Foundations
Clean fill dirt, compactable fill, screened fill and pit run delivered direct to your job site or backyard. Built for grading, lot prep, foundations, retaining walls and raising low spots. No organics, no surprises — structural fill that won’t decompose under what you build on top.
No Organics
Structural Fill
No Minimum
Half-Load Friendly
Same Week
Most Iron County
All-In
Per-Load Pricing
What We Deliver
Every Fill Dirt Spec You Need
Six common fill dirt products tuned to different construction applications. Tell us what’s going on top — pad, foundation, retaining wall, regrade — and we’ll spec the right fill.
Compactable Fill
Engineered to lock in tight under load. Used under foundations, slabs, pads and trench backfill where settling can’t happen.
Foundations · Pads · Trenches
Screened Fill
Run through a screen to remove large rocks and debris. Used when the fill needs to be clean enough to grade or finish smoothly.
Final Grade · Smooth Finish
Pit Run Fill
Raw, unscreened aggregate straight from the pit. Lowest cost per yard — perfect for bulk fill, ranch lanes and rough grading.
Bulk · Ranch · Rough Grade
Structural Fill
Engineered to a gradation spec — used in commercial builds, retaining wall backfill, and anywhere the fill becomes part of the structure.
Engineered · Walls · Commercial
Custom Mixed Fill
Got a spec the yards don’t stock? Call us — we’ll mix to order or source from our supplier network.
Custom Specs · Special BlendsFill Dirt vs Topsoil — Don’t Get These Mixed Up.
This trips homeowners up more than anything else. If you put topsoil under a foundation, the organic matter decomposes over time and the structure settles. Use the right material for the job:
Fill Dirt Structural
- No organics — won’t decompose
- Compacts tight and stays put
- Use under foundations, slabs, pads
- Use for grading and raising low spots
- Use for retaining wall backfill
- Not suitable for growing plants
Topsoil Growing
- Rich in organic matter and nutrients
- Decomposes over time (causes settling)
- Use for lawns and garden beds
- Use for raised planters
- Use for finishing landscape areas
- Never use as structural fill
How It Works
Getting Fill Dirt Delivered Is Simple
01
Spec the Job
Tell us what’s going on top of the fill — pad, foundation, regrade. Call or text (435) 592-5112.
02
Get a Quote
Per-load, all-in pricing on the spot in most cases. No yard fees, no fuel surcharges.
03
We Deliver
Same-day in Cedar City & Parowan before 10 AM. Same-week elsewhere. Drop where you point.
04
You Build
Spread, compact, build on top. Pay after delivery, not before.
Cubic Yard Calculator
How Much Fill Dirt Do You Need?
Enter your area dimensions and depth. We calculate cubic yards (length × width × depth ÷ 27) and add 15% for compaction loss — typical for fill under construction. Not sure on depth? Call us with the application.
You Need Approximately
25.6cubic yards
Estimate includes 15% compaction allowance. For exact load planning, call (435) 592-5112.
Service Area
We Deliver Fill Dirt Across Iron County.
Based in Cedar City. Most loads on the ground within 1–5 business days. Don’t see your spot? Call — we probably get there too.
Why Cedar City Builders Hire Midnight
Spec-Aware Fill. Delivered to the Site.
01
Local Since 2019
Cedar City based. Our trucks live here, our drivers live here.
02
Spec-Aware
We deliver to the gradation and quantity your job needs — not what a yard has overstocked.
03
Same-Week Scheduling
Quotes within an hour. Most loads on the ground within 1–5 business days.
04
Transparent Pricing
Per-load, all-in. No yard fees, no fuel surcharges, no surprises.
05
Job-Site Drop
Pad, foundation footprint, behind the gate — we drop where you point.
06
Standing Orders
Weekly invoicing for crews on phased builds. Set it up once, run it through the project.
“
★★★★★
Called Monday morning, they were on-site Tuesday with three loads of fill. Cleaner job than we expected — homeowner-friendly the whole way.
FAQ
Fill Dirt Questions We Hear a Lot.
What is fill dirt used for?
Fill dirt is used to raise low spots, level a lot before construction, backfill around foundations, build up pads for sheds or driveways, and support retaining walls. It’s structural — no organics — so it won’t decompose and cause settling under what gets built on top.
What types of fill dirt do you deliver?
Clean fill dirt (no organics), compactable fill (structural), screened fill (rocks removed), pit run fill (raw, lowest cost), structural fill (engineered spec), and custom mixed fill — all delivered across Cedar City and Iron County, UT.
What’s the difference between fill dirt and topsoil?
Fill dirt is structural — no organics, no nutrients, used under construction. Topsoil is for lawns and gardens — has organic matter and nutrients, but decomposes over time which causes settling. Never use topsoil as fill under a foundation or pad.
How much fill dirt do I need?
Use the calculator above: length × width × depth in feet, divided by 27. Add 15–20% for compaction loss if the fill will be packed. Call us with the dimensions and we’ll help you size the load.
Do you deliver fill dirt to residential homeowners?
Yes — homeowner driveways, backyards, garden grading, retaining wall backfill, shed pads. No minimum, no judgment. Half-loads for backyards, multi-load runs for builders.
How fast can you deliver fill dirt?
Same-day or next-day in most cases for Cedar City and Parowan — call by 10 AM for same-day. Most other Iron County addresses scheduled within the same week.
How is pricing structured?
Per-load, all-in pricing. No yard fees, no fuel surcharges. Call (435) 592-5112 with the spec and quantity for an on-the-spot quote.
Got a Job That Needs Fill?
Tell us the spec, the dimensions and the timing. We’ll quote on the spot and get the load on the ground — same-week scheduling, per-load pricing.
Get a Free Quote Call (435) 592-5112